Can someone please tell me if the parts on a 1987 Chevy Blazer can interchange with a 1996 Chevy Blazer??
Question: They are both 4 W.D. vehicles. To be more specific, I need to know if the ring and pinion from an '87 Chevy Blazer (S10) will work on a '96 Chevy Blazer. If no one knows the answer, does anyone know who I could call and ask? I appreciate any help given. We were trying to bring it home and driving it down the road, it sounded like a jack hammer!
Answers: Assuming that you're talking about the GM 7.5 /7.625 rear end then yes, the ring and pinion should be interchangeable. Its my understanding that GM used the same rear-end thru '97. Keep in mind that installing used gears may add some harshness coming from the rear end because the ring and pinion actually broke in in a different rear end.
no sorry it wont only about 5 years diff will the parts interchange good luck
If you don't know, call AutoZone, or a similar parts store. If they don't know, they can look it up on their computers or in their manuals. I'm not well versed on the Blazers, so that is the best advice I can give. Good luck.
Ok here's what you need to to I know the older gm and chevys but when in doubt call the guys who know.
www.differentials.com =1-800-446-0950 westcost differentials
www.drivetrainspecialists.com=1-866-45... DTS
www.ringpinion.com=1-888-296-3129 randy's ring & pinion
don't mess with these dip s-h-i-t-s that say it needs to be pulled by a ford or dodge or anything else. cus when it comes down to it if one of these are set up wrong your going to hate life regaurdless of the make of the vehicle
Answers: Assuming that you're talking about the GM 7.5 /7.625 rear end then yes, the ring and pinion should be interchangeable. Its my understanding that GM used the same rear-end thru '97. Keep in mind that installing used gears may add some harshness coming from the rear end because the ring and pinion actually broke in in a different rear end.
no sorry it wont only about 5 years diff will the parts interchange good luck
If you don't know, call AutoZone, or a similar parts store. If they don't know, they can look it up on their computers or in their manuals. I'm not well versed on the Blazers, so that is the best advice I can give. Good luck.
Ok here's what you need to to I know the older gm and chevys but when in doubt call the guys who know.
www.differentials.com =1-800-446-0950 westcost differentials
www.drivetrainspecialists.com=1-866-45... DTS
www.ringpinion.com=1-888-296-3129 randy's ring & pinion
don't mess with these dip s-h-i-t-s that say it needs to be pulled by a ford or dodge or anything else. cus when it comes down to it if one of these are set up wrong your going to hate life regaurdless of the make of the vehicle
More questions & answers:
- Help! 22 year old girl needs help figuring out her broke car!!!?
- Which cam in my 1992 Chevy Pickup C2500 HD?
- Where's the best online site to sell a 67 corvette?
- My lovely 98 chevy blazer =)?
- 1990 454 ss?
- I have a 1980 camaro and i'm thinking of going electric!?
- Corvette zo6 and borat go together like oil and frozen yogurt?
- I have a 1980 camaro and i'm thinking of going electric!?
- 9.5:1 305 in 84 K10 w/2000 stall and edelb air gap perf, 440 int lift 454 exh. 308 gears, 600 carb 700 trans
- 1999 Camaro Z28 Roaring rear end noise....?
- 2004 Chevy Impala 4 Dr SS Supercharged Sedan, questions?
- 95 Chevy Lumina Overheating and not blowing HOT air.?